Calls Welcome: (973) 595-5033  |  BIC License Number: BIC-3938

Our Products

Analytical Bio
Product Offerings

  • High Water Pressure Jet Cleaning for Sewer Systems
  • Video Camera Services for Sewer Systems
  • All Types of Drain Cleaning Services
  • Maintenance of Septic & Grease Trap Systems
  • Car Wash Sludge Removal
  • RIDGID SeeSnake Video Inspection Systems, microDrain & microReel Video Inspection Systems
  • See It, Find It, Clean It, Share It!
 

We Take Care
of all Your Needs

Analytical Bio is your source for all of your pump needs. Our expert team will ensure that you have the right pump for your application.
 
Our team has over 25 years experience in what we do and know the products that will fit your particular system and that will last the test of time. Our clients save a great deal of money over the years because we install the proper products. Please see below for some of the products we offer. This is a small list to show you what kind of pumps we deal with, but please call now to speak to our experienced team as we will know what you need. Thanks for visiting!
 


Sewage Pumps

  • LE100-Series
  • 1 hp Submersible Sewage Pumps
  • 1 hp.
  • 2″ or 3″ Discharge
  • 2″ Solids Handling

Liberty’s LE100-series is a 1 hp sewage pump with 2″ solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish and stainless steel fasteners, the LE100 is designed for years of trouble-free performance. Its quick-disconnect power cord allows for easy interchange and is available in 10’and 25′ lengths. The LE100 can be ordered in 2″ or 3″ discharge configurations and a wide range of voltages.
 

 

High Temperature
Submersible Effluent Pumps

Model Number: HT-6E-CIA-FS

The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough, demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. The Eliminators include pumps for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas, the Eliminators are an ideal solution.
 

Features
  • 1/3 HP shaded pole motor with overload protection
  • Designed for continuous duty
  • Epoxy coated cast iron housing
  • Carbon/Ni-Resist & Viton shaft seal
  • Upper and lower sintered sleeve bearings
  • CSA listed

APPLICATIONS
  • 1-1/2″ DISCHARGE
  • Submersible Effluent Pumps
  • Model Number: 16EH-CIM

The 16EH Series submersible effluent pump from Little Giant is specifically engineered to handle the tough demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas.
 
 
 

FEATURES
  • 1 hp PSC motor with overload protection
  • Completely submersible, designed for continuous duty
  • High head model
  • Handles 3/4″ solids
  • Epoxy coated cast iron housing, cover, volute, and non-clog impeller
  • Carbon/ceramic shaft seal
  • Upper and lower ball bearings
  • UL / CSA listed

APPLICATIONS
  • 3450 RPM
  • Submersible Effluent Pumps
  • Model Number: 20E-CIM

The 20E Series submersible effluent pump from Little Giant is specifically engineered to handle the tough demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas. The Magnum series includes pumps for use in Residential, Commercial Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste and wastewater handling where such materials must be moved upward form a collection area to sewer or septic lines, or drainage areas, the Magnum is an ideal solution.
 

FEATURES
  • 2 hp PSC motor with overload protection
  • Completely submersible, designed for continuous duty
  • Handles 3/4″ solids
  • Epoxy coated cast iron housing, cover, and volute
  • Carbon/ceramic shaft seal
  • Upper and lower ball bearings
  • UL / CSA listed

High Temperature
Submersible Effluent Pumps

Model Number: HT-6E-CIA-FS

The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough, demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. The Eliminators include pumps for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas, the Eliminators are an ideal solution.
 

FEATURES
  • 1/3 HP shaded pole motor with overload protection
  • Designed for continuous duty
  • Epoxy coated cast iron housing
  • Carbon/Ni-Resist & Viton shaft seal
  • Upper and lower sintered sleeve bearings
  • CSA listed

APPLICATIONS
  • 1-1/2″ DISCHARGE

High Temperature
Submersible Sump/Effluent Pumps

Model Number: HT-10E-CIM

This Little Giant 6E Series High Temperature Sump/Effluent pump is specifically engineered to handle the tough, demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas. The HT-6E model withstands temperatures up to 200 F for applications such as boiler blowdown, sump pits, and transformer vaults. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas. The HT-10E model withstands temperatures up to 200 F for applications such as boiler blowdown, sump pits, and transformer vaults. The Eliminators – USA Series – include pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste and wastewater where such material must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution.
 
 
 

FEATURES
  • 1/3 hp shaded pole motor with overload protection
  • Designed for continuous duty
  • Epoxy coated cast iron housing
  • Carbon/Ni-Resist & Viton(r) shaft seal
  • Upper and lower sintered sleeve bearings
  • CSA listed

Package Sewage Systems

Model Number: 9S-SMPXRTA-K
APPLICATIONS
  • SEE 509500 FOR DATA ON PUMP
  • Simplex/Duplex Basin/Cover Assemblies
  • Model Number: BB2436CD2V2D

For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use.
 

 

Utility Toilet Systems

Little Giant Pump Company Utility Toilet Systems provide a way to add a sewage disposal system (SDS) in an existing home as a built-in or free-standing installation. The SDS-9 includes the 9S-CIM, a 4/10 HP sewage pump, which is activated and deactivated by a vertical mechanical float switch. Ideal for installation in basements and room additions.
 
 
 
 
 

FEATURES
  • Designed to accept many toilet styles and sizes.
  • Perfect for basements and room additions.
  • Reduces construction expenses – no need to destroy existing concrete floors.
  • Easy installation.
  • Capable of passing 2″ (51 mm) diameter solids.
  • 2″ (51 mm) check valve.
  • Polyethylene tank lid with adaptaflex seals for a 2″ (51 mm) discharge and 3″ (76mm) vent and vertical mechanical float switch.
  • Includes 30″ length of 2″ PVC pipe.

QTI Residential
Sewage Grinder

The “QTI” Package System is a complete residential sewage grinder system that comes ready to install. The QTI package has a basin that has the discharge plumbing including check valve, the guide rail system, the junction box, and the control floats all pre-assembled to make installation of the package the “Quickest To Install”. The 20G-CIM grinder pump and matched control panel are also included with the basin assembly.
 

FEATURES
  • 2 HP, 208 Volt, 3450 RPM grinder pump, 20G-CIM
  • Nema 4X Control Panel with start circuitry matched to the 2 HP Grinder motor
  • 24 x 72 Fiberglass Basin and cover (BS2472FG)
  • Basin assembly contains rail system, lifting chain, control floats, float bracket, junction box, and discharge plumbing that includes a ball valve / check valve.
  • 4″ Adaptaflex adapter for PVC inlet pipe
 

Magnum
Grinder Control Panel

Little Giant MGP-1C20-2 Magnum Grinder Control Panel 230V, for 20G and 20GH Series Grinder Pumps (513372)
 
Magnum® Grinder Control Panel, for 20G & 20GH Grinder Pumps. COntrol floats are not included and must be ordered separately. Three floats are required to perform on/off/alarm functions.
 
Little Giant MGP-1C20-2 Magnum Grinder Control Panel 230V, for 20G and 20GH Series Grinder Pumps (513372)
 

FEATURES
  • Specifically designed to be used with the 20G-CIM and 20GH-CIM Lift pump chambers Sewage ejector basins
  • Controls pump and warns of high liquid levels Easy to install
  • Corrosion-proof NEMA4X fiberglass enclosure with pad lock provision
  • HOA switch allows for “Hand” (manual), “Off”or “Automatic” operation Alarm ON/OFF switch controls the power too
  • Audible and Visual Alarm Signal Device
  • Entire unit ULand cULlisted Three control floats required (purchased separately) Contains start and run capacitors and start relay necessary for proper motor operation and third-party approval
APPLICATIONS
  • Voltage: 230
  • Hertz: 60
  • Amps: 19.5
  • Phase: 1
  • Weight: 15
  • Dimensions H x L x W (in.): 15.56 x 11.38 x 6.56

Piggyback Mechanical
Float Switches

This Remote Float Switch, (aka Wide Angle)is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps. Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps.
 

FEATURES
  • Motor/Amp Draw
APPLICAITONS
  • Convert any manual pump to an automatic pump, up through 1/2 HP or 1 HP

Low Voltage Water Alarm

Little Giant HW-9 (513350) Low Voltage High Water Alarm.Sensor, that detects water, and alarm connected by 6ft of wire. Adaptable with additional wire (not included) for locating up to 50ft apart. Powered by 9-volt battery (not included). 85-decibel alarm can sound for 3 days.Features Remote sensor detects water and sounds alarm Low battery warning Test bar for system check.
 

 

Piggyback Vertical
Mechanical Float Switches

Little Giant RVMS-10, 115/230V – Piggyback Vertical Mechanical Float Switch, 10′ (3m) Power Cord (599261)The Piggyback Vertical Mechanical Float Switches convert any manual pump, up through 1/2 HP (115V) and 1 HP (230V), 13 max. run amps, to automatic operation. It has an adjustable pumping range from 6.5″ to .75″. Designed for use in confined areas and not sensitive to turbulence. The 599261 model has a 10′ power cord. Description – Little Giant RVMS-10 Float Switch (599261):This new pump switch provides automatic control of a pump in water and sewage effluent applications. The design allows it to operate in applications with limited space, such as small sump chambers. This switch is ideal for timed dosing applications where small amounts of sewage effluent are “dosed” or pumped into the drain field at one time. The float stop can be moved up the lift rod to adjust the pumping range from 6.5″ (17cm) to .75″ (2cm). It can also be used in areas as small as 4″ wide (not including discharge pipe).Features – Little Giant RVMS-10 Float Switch (599261):; Adjustable pumping range from .75″ to 6.5″; Magnetic activation; Heavy duty contacts; Designed for use in confined areas; Not sensitive to turbulence; Controls pumps up to 1/2 HP at 120VAC and 1 HP at 230VAC; UL Listed for use in water and sewage; CSA certified.
 

FEATURES
  • UR listed
  • 1/2 HP
  • 120 Volt
  • 10 ft cord
  • Converts manual pump to automatic


 

Duplex Systems

The Duplex Alarm System/Pump Control provides residential and commercial customers with a reliable means of controlling a duplex (two pump) system in a water or sewage installation. The system consists of a control panel and three sensor floats. The non-corrosive, indoor and/or outdoor enclosure comes pre-assembled. The panel exterior features a large red alarm beacon. An exterior buzzer test/normal/silence switch allows the 83-85db audible alarm buzzer to be silenced or testing of buzzer and light to ensure proper operation of alarm function. The panel interior consists of two heavy-duty motor contactors, printed circuit board controller, and a standard 25 watt (max.) light bulb. Two handy HOA switches allow for either Hand (manual), Off or Automatic pump operation. A control switch turns off power to the float circuitry. The control switch and the HOA switches may be turned off to provide an additional safety feature when servicing. These switches are located inside the panel to protect against activation by unauthorized personnel. Green pump run indicator lights located on control circuit board. Easy-to-follow wiring diagram and terminal strip provide for simple installation.
 

FEATURES
  • Easy to install control panel controls pump and warns of high liquid levels
  • NEMA 4X ultraviolet stabilized thermoplastic enclosure
  • HOA switch allows for Hand (manual) Off or Automatic operation
  • Control/Alarm ON/OFF switch controls power to the control float and circuitry; this and the pump HOA switch provide an additional safety feature when servicing
  • Entire unit UL listed and tested by UL to CSA standards
  • Two sensor floats and an alarm float included on designated models
  • Designed to operate with or without optional fourth control switch
   


Analytical Bio Treatment,

Analytical Bio Treatment is a proven leader in septic and grease trap pumping located in Paterson, New Jersey (NJ) in Passaic County. We serve the New York (NY) Metro Tri-State Area, and all of New Jersey (NJ), New York City (NYC), Pennsylvania (PA), Connecticut (CT) and Long Island (LI). Please contact us as a trusted source for all of your pumping needs.

Learn More About Us


Analytical Bio’s Services
  • • Grease Trap Pumping & Cleaning
  • • Septic Tank Pumping & Disposal
  • • Enzyme Service, Drain Line Inspections
  • • Power Snaking, Drain Cleaning
  • • Sewer & Drain Cleaning, Video Cleaning
  • • Stoppage, Kitchen Sink, Grease Trap
  • • High-Pressure Jetting, Inspections
  • • Grease Trap Confined Space Services
  • • Blasting Services, Stove Grease Disposal
  • • Toilet, Urinal, Floor Drains, Hand Sink
  • • Jetting, Interior Line, Exterior, Interior Main
  • • General Plumbing Services

Contact Us
Analytical BioTreatment
Street: 158 Linwood Ave.
City: Paterson, NJ 07502
Phone: (973) 595-5033

© 2012 Analytical BioTreatment | Site: Roman Media | Wind Powered by: HostRoman Home About Services Products Galleries Blog Contact